12CH 20A High Power Switch Actuator with Current Detection has 12 channels with current detection function(20A for each channel) and 20A magnetic latching relay. With low power consumption and long lifetime, the module has manual control switches and supports scene and sequence control.
■ 12-channel relay output unit
■ Scene control and sequence control
■ Up to 12 separate zones
■ 12 scenes for each zone, scene running time up to 60 minutes
■ 2 sequences for each zone, up to 12 steps for each sequence
■ Light protection delay for each channel (0-60 minutes)
■ Mass turn-on delay for each channel(0-25 seconds)
■ Manual switch for each channel
■ Stair lamp function of the channel settable
■ Channel current, used time of load and alarm status of each channel can be detected.
■ Selected scene or scene before power off automatically activated when device restarts
■ 4CH dry contact long press dimming and short press trigger target function
■ Easy programming
■ Health detection
■ 12-channel current detection, alarm message push function
■ HDL Buspro communication
■ Supports online update
Basic Parameters
Working voltage 24~30V DC
Working current 38mA/24V DC
Input voltage 120V/240V AC (50/60Hz)
Output channel 12CH, 20A/CH
Relay 20A Magnetic latching relay
Maximum current of each channel 20A
Electronic life time of relay >60000 (Resistance load)
Protection Connect a breaker in each channel
Communication HDL Buspro
External Environment
Working temperature -5℃~45℃
Working relative humidity ≤90%
Storage temperature -20℃~60℃
Storage relative humidity ≤93%
Specifications
Dimensions 216mm×90mm×64mm
Net weight 800g
Housing material Flame retardant nylon
Installation 35mm DIN rail installation
Protection rating (Compliant with EN 60529) IP20